Friday, September 21, 2012

Decoding the 10W30 on Motor Oil Containers


You see those cryptic combinations of letters and numbers on motor oil bottles everywhere. What do they mean?

To decipher them, you have to understand viscosity. Viscosity measures how much the motor oil can resist flow. In other words, if you tip a motor oil bottle over, how fast it spills out indicates its viscosity. The more viscous, the slower it moves.
 
To indicate viscosity, the SAE (Society of Automotive Engineers) developed a standard scale.

0W is thinnest ("W" stands for winter)
5W
10W
15W
20W
25W
20
30
40
50
60 is thickest

The recommended multi-viscosity oil you use in your vehicle is usually good all year round because it can respond to a range of temperatures. That's why you see two numbers on most oils.

For example: 10W30
This means the viscosity is at 10W when the engine is cold and 30 when the engine is hot.
Low viscosities are good for cold temperatures (hence the "W" association) because the oil is thinner. Thinner motor oil flows more easily and moves quickly. When you start a cold engine up again, motor oil needs to travel to the top of the engine, where it trickles back down. Since motor oil is vital to lubricating your engine, it needs to move quickly and low viscosity helps it do just that.

When your engine heats up, higher viscosities mean the motor oil won't thin out too much and will keep parts separated by a film of oil. So your motor oil is always maintaining a delicate balance: it needs to flow well when the engine is cold but also retain enough body at higher temperatures to keep metal parts lubricated and separated.

To find out what motor oil grade is right for your vehicle, check your vehicle's owner's manual. You can also stop by a Utah Jiffy Lube location and have a Jiffy Lube technician recommend the best grade motor oil for your vehicle.



Photo Credit: "looseid"

1 comment:

  1. pleasant bLog! its fascinating. much obliged to you for sharing. Gate valves are primarily used to permit or prevent the flow of liquids. It is because of their ability to cut through liquids, that they are commonly used in this industry. With an increase in the global energy demand, the demand for the equipment used in the oil and gas industry is also on a rise. So here we have the list of Top Global Gate Valve Manufacturers. gate valve manufacturers

    ReplyDelete